Water Quality Report by ZIP Code: How to Find Yours
Your local water quality report comes from your water supplier every year by July 1. Here is how to find it and how to read its table.
Your water quality report is called a Consumer Confidence Report, and your water supplier must send it to you each year by July 1. To find yours, check your water bill for the name of your supplier and look on its website, or use the U.S. Environmental Protection Agency’s CCR search, which finds reports by state and by city, town or county rather than by ZIP code.
How to find your report
- Look at your water bill. The supplier named on it is the community water system that has to send you the report, sometimes called the annual drinking water quality report.
- Check the supplier’s website or call it. The EPA says that if you did not receive your report, you can call your local water supplier for a copy.
- Use the EPA’s CCR search. Start at epa.gov/ccr and choose “Find your local CCR”. The search asks for a state, and you can add the water system’s name or a city, town or county. There is no ZIP code box, so the EPA suggests filling in only the state and browsing the results, or adding your county to narrow them. Not every water system’s report is in the search.
- Call the EPA’s Safe Drinking Water Hotline on 1-800-426-4791 if you cannot find your supplier or its report.
How to read the table in your report
Every report includes a table of what was found in the water. The EPA explains its columns like this.
| Column | What it tells you |
|---|---|
| MCLG (Maximum Contaminant Level Goal) | If the level in the “Your Water” column is below this goal, there is no known or expected risk to health |
| MRDLG (Maximum Residual Disinfectant Level Goal) | The same kind of goal for the disinfectant added to the water |
| MCL (Maximum Contaminant Level) | If “Your Water” is above this level, the system is in violation of EPA’s regulations |
| TT (Treatment Technique) | A required process meant to reduce the level of a contaminant in drinking water |
| MRDL (Maximum Residual Disinfectant Level) | The highest level of a disinfectant allowed in your drinking water |
| Your Water | The highest level of that contaminant found in your water during sampling |
| Range | The low and high levels at which the contaminant was detected |
| Violation | Shows whether a contaminant is above the level the EPA allows |

What else is in the report
According to the EPA, each report sets out where the water comes from (a lake, river, aquifer or other source), a short summary of the risk of contamination of that source, and the regulated contaminants found in the water. It gives the possible health effects of any contaminant found in violation of an EPA standard and what the water system is doing to restore safe drinking water.
The report also carries a statement for vulnerable people about avoiding Cryptosporidium, information on nitrate, arsenic or lead where these may be a concern, phone numbers for more information including the water system’s own, and the Safe Drinking Water Hotline. A state may add its own information, but its reports must still include these basics.
Why you might not get one
You will not receive a report if you do not pay your own water bill, for example in an apartment, condo or rented home, or if your water comes from a private well. The EPA suggests that renters ask their building manager or search online for the water system’s report.
Changes coming in 2027
On May 15, 2024, the EPA announced revisions to the rule behind these reports. Starting in 2027, reports are meant to be easier to read, to support translations and to say more about lead in drinking water, and water systems serving over 10,000 customers will have to send them twice a year.
If something in your report worries you
The EPA’s hotline on 1-800-426-4791 can tell you more about your report. If you are sensitive to contaminants or at higher risk of infection, talk to your healthcare provider, and ask your water company about removing chemicals and microbes from your water.